Sydney & Regional NSW
Fire Protection Coatings
Sydney
Licensed, insured fire protection coating application for structural steel and fire-rated building elements, delivering certified passive fire protection across Sydney and NSW.
Protecting Structure, Not Just Surface
SPS Painting Group applies fire protection coatings across Sydney and Regional NSW, covering structural steel, timber and other fire-rated building elements on commercial, industrial and construction projects. Passive fire protection coatings work by expanding and forming an insulating char layer when exposed to heat, slowing the transfer of thermal energy to the structure and buying critical time for evacuation and emergency response.
Fire protection coatings are typically required to meet a specified Fire Resistance Level (FRL) under the National Construction Code, tested and assessed against Australian Standards such as AS1530.4 and AS4100. That means the coating system, film thickness and application method all need to match the certified system for your building’s compliance requirements — this isn’t a job where a generic paint system can be substituted in.
Every fire protection coating project starts with confirming the required FRL and specified system with the architect, engineer or building certifier, followed by proper substrate preparation — steel needs to be correctly primed and, in many cases, blast-cleaned to the right standard before the fire-rated system is applied. We apply coatings by spray equipment where required, using water-based, solvent-based or hybrid systems depending on the specification.
Fire protection coatings are commonly specified on commercial and industrial projects, particularly for exposed structural steel, car parks, warehouses and multi-storey buildings where compliance is non-negotiable. If an existing fire-rated coating has been damaged or compromised, that’s a separate but related service — see our intumescent coating repairs page for restoring damaged systems back to certified performance.
Once installed, fire protection coatings generally require little maintenance, but ongoing inspection matters — damage can occur after installation through impact or water exposure, and many systems form part of a building’s Annual Fire Safety Statement obligations. We support clients with scheduled inspections and maintenance to help keep fire-rated systems compliant over the life of the building. Where a project also involves masonry or render surfaces, we can incorporate mineral and silica paint systems into the wider scope.
Fire Protection Coatings Fast Facts
- Licence Number349384C
- ACN160 196 470
- Service AreaSydney & Regional NSW
- AssociationMaster Painters Australia
- StructureOwner-operated
- Group Experience20+ years
How a Fire Protection Coating System Gets Applied
A compliance-first process, matched to the specified fire rating for your project.
01
Specification Confirmation
We confirm the required FRL, coating system and film thickness with the project’s engineer, architect or certifier.
02
Substrate Preparation
Steel or other substrates are prepared to the required standard, including priming and surface cleaning.
03
Coating Application
The fire-rated system is applied by spray or brush as specified, in the correct number of coats and thickness.
04
Film Thickness Verification
Dry film thickness is checked against the specification to confirm the coating meets its certified rating.
05
Quality Inspection & Sign-Off
The completed system is inspected and documented before handover.
06
Ongoing Inspection & Maintenance
We support scheduled inspections to help keep your fire-rated coatings compliant over time.
Why Builders and Facility Managers Trust Us With Fire Coatings
Licensed & Fully Insured
License 349384C gives you a documented, accountable contractor for fire-rated coating application.
Master Painters Australia Member
Recognised membership with the NSW/ACT painting industry association. Member of Master Painters Australia.
20+ Years of Group Experience
Backed by the Sydney Paint Stripping Group’s heritage and remedial and construction coatings expertise.
Owner-Operated
You deal directly with the people accountable for the work, not a call centre.
Fire Protection Coating Services We Provide
Fire protection coatings cover a range of applications depending on the building, substrate and required fire rating. Here's what SPS Painting Group delivers.
Structural Steel Fire Protection
Application of fire rated coatings to structural steel columns, beams and exposed steelwork.
Intumescent Fire Protection Coatings
Thin-film and thick-film intumescent systems that expand and char to protect steel in a fire.
Passive Fire Protection Coatings
Full passive fire protection coating systems for commercial, industrial and construction sites.
Fire Resistant Coatings for Timber
Fire-rated coating systems suited to timber and other combustible fire-rated substrates.
Car Park & Warehouse Fire Coatings
Fire protection paint for exposed steel in car parks, warehouses and industrial facilities.
New Construction Fire Coating Application
Fire protection coating contractor services for structural steel during new builds and major construction.
Compliance-Matched Coating Systems
Coating systems specified and applied to meet required FRL and Australian Standards such as AS1530.4.
Fire Coating Inspection Support
Inspection support to help identify damage or wear ahead of Annual Fire Safety Statement requirements.
Repair Coordination
Where systems are damaged, we coordinate repair work through our intumescent coating repairs service.
Fire Protection Coating Projects Across Sydney
Below are real images from recently completed fire protection coating projects across Sydney and NSW.
Fire Protection Coatings FAQs
We apply fire protection coatings across Sydney and Regional NSW, on commercial, industrial and construction projects requiring certified passive fire protection.
Yes. SPS Painting Group is licensed (Licence 349384C) and insured, and is a proud member of Master Painters Australia (NSW/ACT).
Fire protection coatings, particularly intumescent systems, expand and form an insulating char layer when exposed to heat, slowing heat transfer to the structure and helping maintain structural integrity for a specified period.
Fire protection coating systems generally need to be tested and assessed to Australian Standards such as AS1530.4 and AS4100, and meet the Fire Resistance Level required under the National Construction Code.
Yes — we apply certified fire protection coating systems to structural steel during new construction, matched to the specification confirmed by the project's engineer or certifier.
Fire protection coatings refers to new application of a certified fire-rated system, while intumescent coating repairs involves restoring damaged or compromised existing coatings back to their tested performance.
Every quote starts by confirming the required fire rating and specified coating system for your project, so pricing reflects the actual scope and compliance requirements, not a generic estimate.